EASY to install: fill some soap into the bottle with warm water to get thick foam; Then connect 1/4″ quick connection plug to Pressure Washer Gun or Wand. Finally, adjust the knob on the top to desired foam level and then foam sprayer will disperse thick foam. The knob adjusts the foam dispensing amount and the nozzle adjusts the sprinkle pattern.
Adjustable nozzle for accurate mixing and foam generation. Turn the top knob right (-) to get the thickest mixture, adjust the nozzle to get a proper sprinkle pattern, and let it loose.
5 Nozzle Tips have different angle (0, 15, 25, 40, 65 degree). Choose different nozzle according to the actual need. Such as watering flowers and plants, washing car. They also can be attached to a Quick-Connect Wand for swifter application and more.
Application: ideal for Motorcycle, Car Washing; Roofs, Driveways, Siding washing; floors, Windows washing, it is best product for Detailing Trucks or SUVs.
Specification: Tool Daily Foam Cannon with 1/4 Inch Quick Connector, 1 Liter, 5 Pressure Washer Nozzle Tips
Package Dimensions
8.74 x 4.92 x 3.62 inches
Item Weight
1.21 pounds
Manufacturer
Tool Daily
Item model number
Tool Daily
Is Discontinued By Manufacturer
No
Photos: Tool Daily Foam Cannon with 1/4 Inch Quick Connector, 1 Liter, 5 Pressure Washer Nozzle Tips
13 reviews for Tool Daily Foam Cannon with 1/4 Inch Quick Connector, 1 Liter, 5 Pressure Washer Nozzle Tips
4.5out of 5
★★★★★
★★★★★
10
★★★★★
2
★★★★★
0
★★★★★
0
★★★★★
1
Write a review
Show allMost HelpfulHighest RatingLowest Rating
★★★★★
maggie –
For what other foam guns cost, and the rated pressure/GPM, this thing produced a lot of foam.Its not like a bubble bath fluffy amount. But it is a thick coating of foam. After you figure out where to set the 2 knobs, youll be foaming up car boats and whatever else 2 consenting adults wanna foam up. It required less time and car wash soap to do 2 cars than I had been using to do one. The bottle is heavy gauge plastic. But I wouldnt recommend playing catch with it. Plus I got 5 tips for the pressure washer.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Adriana Munteanu –
The media could not be loaded.
 I used Chemical Guys Mr.Pink soap for the wash. After adjusting the settings the foam cannon is perfect for the job.
Used my Ryobi Electric power washer 2000psi and handled just perfect.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
PWC –
This set works hand in hand with the quick connect adapter for my Karcher pressure washer. As I have stated in my review for that item , these different degrees/pressure of water spray tips and also the foam cannon make car washing an addictive hobby for me now. The ease of use with the quick change setup makes your pressure washer a not only fun , but versatile tool in your cleaning arsenal. I highly recommended this. The results are outstanding !
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Caliber29 –
It makes a thick foam that covers the car in next to no time. I used armor all snow foam car wash. It took about 2/3 of a cup of soap to wash my suv. Definitely a great buy. The nozzles that come with it are the same as the ones that came with my pressure washer.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Timothy Raleigh –
This foam cannon looks just like the more expensive products. No instructions but hey, can you put liquid in a bottle and turn a knob? This thing makes foam, lots of it. Very impressive. I wet my vehicle, foam it and use a terrycloth mitt. Makes for an easy wash. I usually mix the soap with water, 50/50, and seems to work better than pure soap. The included spray tips are a bonus and work as well as OEM. If I ran over it tomorrow, I would call it a successful run and buy a new one. But it looks like it will hold up as long as I will. Nothing to wear out but me.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Old School –
I noticed that most reviews here are just for the power washer nozzles. As most know, Amazon often mixes product reviews. I ordered the foam cannon and the nozzles came as a bonus. BTW, they are the same quality as the nozzles that came with my pressure washer. It’ almost seems like they all are the same as if they are made by the same manufacturer. They’re high quality. I see someone mentioned that they wear out. I can’t imagine how power washer nozzles can wear out and I’ve been using the ones that came with my pressure washer for years with absolutely no problems. Brass and aluminum is not worn out by soapy water or plain water. The only thing I can think of is that person was experiencing a buildup of minerals from hard water. If that’s the case, that’s easily cleaned out using LimeAway or any similar product or even just vinegar.
Anyway, enough of that. It’s the foam cannon that I ordered this combination for. I put a few tablespoons of Chemical Guys CWS_110 Honeydew Snow Foam in the jar and filled it about 2/3rds the way with water. I turned it on and holy smoke! The thickest foam covered everything I tried it on. It was like icing a cake. Beautiful thick foam! I immediately thought that this is one tool that I’m going to wonder how I ever got along without in the past. This is going to be great not just for my truck, SUV and motorcyle, but also for windows, etc. When testing it, I used it on our big gas grill. It worked beautifully.
Before ordering this, I read many reviews as I always do when buying something. Like the nozzles, I can’t figure how the foam cannon didn’t work for some people. The only thing I can think of in this case is they used the wrong foaming product or they didn’t adjust it right. When I first turned it on, the blast was very strong and narrow. It really blasted the foam on in a tight stream but it spread out easily and quickly. Then a turn of the adjustment and I could get anything from a wide, gentle fan of foam to the concentrated, narrow blast.
The way these work is very simple and basic. It just applies the venturi principle. There’s very little that can go wrong with the cannon itself. BTW, you can tell this foam cannon is high-quality when you pick it up. Other than the jar, it’s almost all solid brass. I doubt if there’s any practical difference between this and higher priced foam cannons. In fact, I’d be suprised if they all aren’t virtually identical for all practical purposes so why spend more. The old adage that you get what you pay for is nonsense. If it was true, there would be no reason to shop around and compare prices. That rusty old adage would mean that you would get a better car if you paid more at one dealership for the same exact car than you paid at another dealership. Nonsense! An example from last week: I’m changing the transfer case oil in my truck. Most dealers online charge $49.95 to $59.99 per quart!!!! I went to the most popular online auto parts store and I got the same exact stuff for $5.35 per quart. My point is, just because someone else charges more for a foam cannon doesn’t mean it’s better. This one is a great value, especially considering I now have a spare set of nozzles for my power washer.
Just buy it!
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Mitch Mitchell –
The media could not be loaded.
 This is my first experience with a foam cannon, I used it with CG maxi suds 2 cut 50/50 with a Ryobi 3100psi 2.6gpm gas pressure washer
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
nairdie81 –
The media could not be loaded.
 So far, so good!!! The bottle feels like it was very well made!! Strong and durable unlike other products that break around the neck. Now, I’ve only used it once so time will tell but I like it so far. I’m still messing around with the soap to water ratio so foam isn’t where I want it to be but nothing to complain about.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Logan R. Taggart –
Good product , is doing a great job.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
maggie –
Product is exactly as described and seems to be a lot cheaper than some of the name brands. The brass fittings seem to be durable but I will update the review if that proves false. No leaks. Would buy again.
NOTE: You will *most likely* need to purchase a Quick Connect M22 to 1/4 Male Coupler Adapter, the quick connect side fits the spray cannon and thew 1/4 Male end seems to be a fairly universal fitment for the pressure washer end. I purchased this one here and it works great with this product.
I was very concerned when I first bought this product because it was so cheap. I decided I would take a chance and if it didn’t work then I would just return it. Well turns out this product is great! It is very well built and heavy so you know it will last. The suds this cannon makes are perfect as well. There is no reason to pay $40 for the other cannons when this one works just as good. The only thing I recommend is to buy the better soap. Chemical Guys does make the best soap and when I first used this product that is the soap I used. My car is spotless and the whole process only took about 30 minutes from start to finish. Do not waste your money on more expensive cannons!
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Sum beach –
This was well priced and easy to use. The foaming spray was excellent. I put Meguiars car wash in the bottle, about 3 oz or 90ml, then topped up with warm water. Gave it a little shake then attached to the high pressure cleaner. With the 1 liter bottle I was able to spray/coat my SUV about four to five times before the dispenser ran dry and I then rinsed off. For a quick wash without scrubbing, this was great as I live in a very dusty rural area of South Australia. No more bucket and sponge for me !
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Amazon Customer –
If you are excepting thick foam, you’ll be disappointed. I purchased this foam cannon and tried using it with a ryobi electric pressure washer, 1600 psi 1.2 gpm. All I got was a lot of soapy water. I gave the cannon the benefit and figured that I probably needed a 1.1mm orifice. I installed the new orifice with the same results. Then I thought maybe my pressure washer didn’t have high enough pressure and flow rate so I used it with my dad’s gas pressure washer that is 2700 psi and 2.3 gpm. Same thing, SOAPY WATER NO FOAM! I feel I have given this product more chances than it deserves. Don’t waste your time or money on this cannon. You’re better off just using a bucket of soap. If you really want a foam cannon, purchase a different one. This one is terrible.
maggie –
For what other foam guns cost, and the rated pressure/GPM, this thing produced a lot of foam.Its not like a bubble bath fluffy amount. But it is a thick coating of foam. After you figure out where to set the 2 knobs, youll be foaming up car boats and whatever else 2 consenting adults wanna foam up. It required less time and car wash soap to do 2 cars than I had been using to do one. The bottle is heavy gauge plastic. But I wouldnt recommend playing catch with it. Plus I got 5 tips for the pressure washer.
Adriana Munteanu –
The media could not be loaded.
 I used Chemical Guys Mr.Pink soap for the wash. After adjusting the settings the foam cannon is perfect for the job.
Used my Ryobi Electric power washer 2000psi and handled just perfect.
PWC –
This set works hand in hand with the quick connect adapter for my Karcher pressure washer. As I have stated in my review for that item , these different degrees/pressure of water spray tips and also the foam cannon make car washing an addictive hobby for me now. The ease of use with the quick change setup makes your pressure washer a not only fun , but versatile tool in your cleaning arsenal. I highly recommended this. The results are outstanding !
Caliber29 –
It makes a thick foam that covers the car in next to no time. I used armor all snow foam car wash. It took about 2/3 of a cup of soap to wash my suv. Definitely a great buy. The nozzles that come with it are the same as the ones that came with my pressure washer.
Timothy Raleigh –
This foam cannon looks just like the more expensive products. No instructions but hey, can you put liquid in a bottle and turn a knob? This thing makes foam, lots of it. Very impressive. I wet my vehicle, foam it and use a terrycloth mitt. Makes for an easy wash. I usually mix the soap with water, 50/50, and seems to work better than pure soap. The included spray tips are a bonus and work as well as OEM. If I ran over it tomorrow, I would call it a successful run and buy a new one. But it looks like it will hold up as long as I will. Nothing to wear out but me.
Old School –
I noticed that most reviews here are just for the power washer nozzles. As most know, Amazon often mixes product reviews. I ordered the foam cannon and the nozzles came as a bonus. BTW, they are the same quality as the nozzles that came with my pressure washer. It’ almost seems like they all are the same as if they are made by the same manufacturer. They’re high quality. I see someone mentioned that they wear out. I can’t imagine how power washer nozzles can wear out and I’ve been using the ones that came with my pressure washer for years with absolutely no problems. Brass and aluminum is not worn out by soapy water or plain water. The only thing I can think of is that person was experiencing a buildup of minerals from hard water. If that’s the case, that’s easily cleaned out using LimeAway or any similar product or even just vinegar.
Anyway, enough of that. It’s the foam cannon that I ordered this combination for. I put a few tablespoons of Chemical Guys CWS_110 Honeydew Snow Foam in the jar and filled it about 2/3rds the way with water. I turned it on and holy smoke! The thickest foam covered everything I tried it on. It was like icing a cake. Beautiful thick foam! I immediately thought that this is one tool that I’m going to wonder how I ever got along without in the past. This is going to be great not just for my truck, SUV and motorcyle, but also for windows, etc. When testing it, I used it on our big gas grill. It worked beautifully.
Before ordering this, I read many reviews as I always do when buying something. Like the nozzles, I can’t figure how the foam cannon didn’t work for some people. The only thing I can think of in this case is they used the wrong foaming product or they didn’t adjust it right. When I first turned it on, the blast was very strong and narrow. It really blasted the foam on in a tight stream but it spread out easily and quickly. Then a turn of the adjustment and I could get anything from a wide, gentle fan of foam to the concentrated, narrow blast.
The way these work is very simple and basic. It just applies the venturi principle. There’s very little that can go wrong with the cannon itself. BTW, you can tell this foam cannon is high-quality when you pick it up. Other than the jar, it’s almost all solid brass. I doubt if there’s any practical difference between this and higher priced foam cannons. In fact, I’d be suprised if they all aren’t virtually identical for all practical purposes so why spend more. The old adage that you get what you pay for is nonsense. If it was true, there would be no reason to shop around and compare prices. That rusty old adage would mean that you would get a better car if you paid more at one dealership for the same exact car than you paid at another dealership. Nonsense! An example from last week: I’m changing the transfer case oil in my truck. Most dealers online charge $49.95 to $59.99 per quart!!!! I went to the most popular online auto parts store and I got the same exact stuff for $5.35 per quart. My point is, just because someone else charges more for a foam cannon doesn’t mean it’s better. This one is a great value, especially considering I now have a spare set of nozzles for my power washer.
Just buy it!
Mitch Mitchell –
The media could not be loaded.
 This is my first experience with a foam cannon, I used it with CG maxi suds 2 cut 50/50 with a Ryobi 3100psi 2.6gpm gas pressure washer
nairdie81 –
The media could not be loaded.
 So far, so good!!! The bottle feels like it was very well made!! Strong and durable unlike other products that break around the neck. Now, I’ve only used it once so time will tell but I like it so far. I’m still messing around with the soap to water ratio so foam isn’t where I want it to be but nothing to complain about.
Logan R. Taggart –
Good product , is doing a great job.
maggie –
Product is exactly as described and seems to be a lot cheaper than some of the name brands. The brass fittings seem to be durable but I will update the review if that proves false. No leaks. Would buy again.
NOTE: You will *most likely* need to purchase a Quick Connect M22 to 1/4 Male Coupler Adapter, the quick connect side fits the spray cannon and thew 1/4 Male end seems to be a fairly universal fitment for the pressure washer end. I purchased this one here and it works great with this product.
https://www.amazon.com/gp/product/B07CRTJDNQ/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
Dave D –
I was very concerned when I first bought this product because it was so cheap. I decided I would take a chance and if it didn’t work then I would just return it. Well turns out this product is great! It is very well built and heavy so you know it will last. The suds this cannon makes are perfect as well. There is no reason to pay $40 for the other cannons when this one works just as good. The only thing I recommend is to buy the better soap. Chemical Guys does make the best soap and when I first used this product that is the soap I used. My car is spotless and the whole process only took about 30 minutes from start to finish. Do not waste your money on more expensive cannons!
Sum beach –
This was well priced and easy to use. The foaming spray was excellent. I put Meguiars car wash in the bottle, about 3 oz or 90ml, then topped up with warm water. Gave it a little shake then attached to the high pressure cleaner. With the 1 liter bottle I was able to spray/coat my SUV about four to five times before the dispenser ran dry and I then rinsed off. For a quick wash without scrubbing, this was great as I live in a very dusty rural area of South Australia. No more bucket and sponge for me !
Amazon Customer –
If you are excepting thick foam, you’ll be disappointed. I purchased this foam cannon and tried using it with a ryobi electric pressure washer, 1600 psi 1.2 gpm. All I got was a lot of soapy water. I gave the cannon the benefit and figured that I probably needed a 1.1mm orifice. I installed the new orifice with the same results. Then I thought maybe my pressure washer didn’t have high enough pressure and flow rate so I used it with my dad’s gas pressure washer that is 2700 psi and 2.3 gpm. Same thing, SOAPY WATER NO FOAM! I feel I have given this product more chances than it deserves. Don’t waste your time or money on this cannon. You’re better off just using a bucket of soap. If you really want a foam cannon, purchase a different one. This one is terrible.