![](https://m.media-amazon.com/images/I/81Ij+xdYZAL._AC_SL520_.jpg)
[Upgraded-2nd Generation] Miracase Universal Phone Holder for Car, Air Vent Car Phone Holder Mount Compatible with iPhone 13 Series/iPhone 12…
Original price was: $29.99.$23.99Current price is: $23.99.
Last updated on August 27, 2024 1:30 am Details
Rachel –
This is the 3rd cell phone holder I’ve purchased. This one fits perfectly in my Honda Civic air vent! Plus-it holds the phone (iphone 11) with the wallet case so I don’t have to take the phone out every time I use the holder. Perfect!
David Slifer –
I’m not a fan of the suction cups or having to stick a magnetic strip on my phone to use the magnetic ones so I’ve had my fair share of vent mounts over the years. With most vent mounts you just slide the mount onto the vent blade and you’re done. The problem with that is there’s no stability. Over time they wear out and fall off. Miracase made sure this doesn’t happen with this mount. The directions come in several languages and they’re REALLY easy to follow. Not only is there a hook arm that grabs behind the vent blade to hold it in place (which you can tighten to your liking) but it has a clip that is opened by pushing a button so it can grab onto the blade giving the mount extra stability. Once the mount is on the vent you can tighten or loosen the nut to your liking but make sure not to overtighten as you could possibly snap the vent blade.
After driving around on some less than desirable roads (thanks to roadwork being done) I have to say, I’m extremely pleased with how well the mount holds up. There’s no jossling or slipping when going over bumps or around turns. And, because of the design it’s really easy to see my phone for navigation without having to look down or block the sun glare. I can simply loosen the nut, rotate the mount to turn my phone away from the sun, and tighten the nut again to hold it in place. The auto-release button on the back of the mount is an awesome feature and works great making one-handed phone removal a piece of cake.
This mount is definitely worth the money!
Kathy Brown –
stupid thing never worked complete waste of money after I posted my review I was contacted by manufacturers begging me to delete my review for a full refund this was a bait and switch because they never bothered to refund anything DO NOT BUY THIS PIECE OF GARBAGE ITS USELESS AND A WASTE OF MONEY AND THE MANUFACTURER IS OBVIOUSLY CORRUPT.
Milagro –
I was actually surprised at how awesome this phone holder works in the car on the vent. I’ve tried other vent clips and they just fall off and really suck. I’ve also tried the ones that are supposed to have suction on the window or the dash but they never work either. I use GPS a lot and this holder is actually the best that I’ve ever purchased and trust me I’ve used a lot of them. It was actually pretty easy to install and I like how the little vent clip at the back Ben’s a bit to hold onto the vent. I really love the way you press the button on the back and the little arms open up so you can just take the phone out without it falling off or moving around. The base of it is also perfect for charging the phone while driving. Definitely 5 stars!!!
David Slifer –
This is the second product I purchased from Miracase. It fits my Toyota Prius Car vent and was very easy to install. Best of all it accommodates wide phone cases! Now both our cars have their products!
Rachel –
The holder is very durable so far, it was easy to install once you realized you unscrew the metal hook to latch the back of the vent. You can then clamp it as well onto the front of the vent. It makes it by far the most sturdy case I have bought. The only very slight drawback is there isn’t much rotation horizontally, enough to see the screen ok, but I would have liked a little more rotation. The last feature I really liked was that to tighten my phone you simply set in place and squeeze and it holds the phone perfectly. Then, to release simply push the button on the back of the case and the 2 side flanges release allowing you to grab the phone without tugging or pulling on the case.
Shannon Kirby –
The media could not be loaded.
This phone mount is very sturdy. It holds the angle/position where I want the phone. It fits my Toyota Rav 4 LE perfectly. I like the hook design at that back that’s why I purchased the phone mount in the first place. Overall, it’s better than the mpow phone mount I had. It holds my iPhone 12 Pro Max.
Milagro –
This held my phone in the vent very well. Recently, drove 5500 miles with many rough roads, forest roads and interstate and it didn’t have any issue with it holding my phone.
Since it’s a vent mount I did not want it obstructing my vent (drivers side). I mounted on the passenger side and rotated it so I could view it. The issue is the rotation angle L/R is quite limited and was annoying for my mounting. It needs about another 10-15 deg in my opinion. I did make a mod to it so I could use it in my situation, but it could be done easy enough in Rev 3.
Shannon Kirby –
Good design, clips on well to the vent fin. It only attaches to 1 of the fins vent and rests on the lower fins, so I am concerned about the stress on the 1 vent fin over the long term. It sticks out a bit far from the vent, so if the ride is slightly bumpy the phone is wiggling around a lot. Installation is easy if you read the instructions.
The mount holds the phone well even with a reasonably thick case, and clipping it in and out is super easy as the release button is in a natural place.
Overall It’s a nice product, but I still am concerned about the long-term wear on just the 1 vent fin.
Cathy W. –
This is the third and final attempt of a vehicle cell phone mount I’ve bought recently. The others have been garbage. This is the one to end all others.
For those that live in hot climates- you’ve found the winner. Anything dash or interior window mounted will not work due to hot climate. So for me, that fact is key. Also- it brings up your viewing angle nearest your driving eyeline; increasing overall safety.
I have vertical vent slots- and this holder works flawlessly. Mounts sturdy. No shifting. Heat doesn’t affect it- and as a bonus it bumps it out from your vent- so you don’t lose the air flow from where it is attached. See the pictures.
silent –
I like how the phone is clamped in and released. I also like how the mount attaches to the vents, BUT, because the mount is extended out a couple inches from the vent, this creates quite a bit of leverage on the fragile vent louvers.. Using a heavy PRO series phone on this mount, the phone bounces around a lot and I am afraid the fragile louvers will break out.
I guess this would be OK for smaller phones, but not a large PRO series phone. For larger phones, I suggest a dash mounted holder.
Chris K –
Very pleased with this holder. I’ve tried many others and the phone often fell out .
This holder does allow the AC or air from vents and it holds securely. The quick release button is very helpful too.
George Barnett –
I am a picky and demanding person, research products and expect them to perform as expected. I have tried MANY different phone holders, from ball and magnet to vent to cup holder. All have fallen short of expectations. Vent holders simply fall off, cup holder ones take up the use of the cup holder for cups, and magnet ones eventually fall off when the inside temperature gets too hot. I had purchased a magnetic mount that glued to my dashboard that worked well until the internal heat in my car made it fall off. I purchased an epoxy that I used, additional earth magnet discs to increase the strength and that worked well for a while. I was shocked to find on the first 100 degree day to find my phone on the floor along with the mount. Frustrated, I started a search for yet another mount. I started considering a windshield mount, but reviews stated that the suction failed either over time, or with excessive heat. The search continued. I stumbled upon this vent mount and was intrigued, especially since I never had success in the past. What I looked about this particular version was the small arm that grasps the vent blade from behind, pulling the tension of the mount tight to the vent itself. Additionally, the fact that this unit had been updated to have the arm made of metal further gave me hope. Let me say that this mount is by far the best mount I have ever purchased. It took 10 seconds to install, can be removed in another 10 seconds, is extremely sturdy with no movement or vibration, and can be placed on most vehicles. I tried it on my Outback as well as my wife’s Prius and the mount fit nicely. I wish I had found this mount some time ago. It was have saved me money, and the permanent disk epoxied to my dash from the prior mount. You will not regret this purchase. Great design.