HUANUO Dual Monitor Stand, Adjustable Spring Monitor Desk Mount Swivel Vesa Bracket with C Clamp/Grommet Mounting Base for 17 to 27 Inch Computer…
Original price was: $67.99.$59.99Current price is: $59.99.
Last updated on May 12, 2024 12:41 am Details
- Increase Comfort & Productivity – This dual monitor stand raises monitors to eye level, improving posture, relieving strain on neck & shoulders while increasing productivity levels.
- Install In 10 Min or Less – The 1-piece gas spring arm simplifies the assembly. You just need to choose the proper mounting base and mount the monitors. The setup can be completed in 10 min or less.Comes with both C clamp and grommet kits, this stand fits desks with or without a hole. Both of C clamp and grommet mounting fit desk thickness up to 3.74”.
- Optimize Your View and Workstation – The stand allows your monitor to swivel, tilt and rotate. Freely set your monitors to customized angle and position while saving up much valuable space on your desktop.
- Hold Your Monitor Stably – The solid construction and stable clamp/grommet base provide stable and secure holding for your monitors.
- Fit Your Monitors – Widely fit two 17″ to 27″ flat / curved monitors with Vesa pattern 75×75 and 100×100 from various brands; Each arm holds 4.4lbs to 14.3lbs.
Specification: HUANUO Dual Monitor Stand, Adjustable Spring Monitor Desk Mount Swivel Vesa Bracket with C Clamp/Grommet Mounting Base for 17 to 27 Inch Computer…
|
Photos: HUANUO Dual Monitor Stand, Adjustable Spring Monitor Desk Mount Swivel Vesa Bracket with C Clamp/Grommet Mounting Base for 17 to 27 Inch Computer…
10 reviews for HUANUO Dual Monitor Stand, Adjustable Spring Monitor Desk Mount Swivel Vesa Bracket with C Clamp/Grommet Mounting Base for 17 to 27 Inch Computer…
Show all
Most Helpful
Highest Rating
Lowest Rating
Add a review
HUANUO Dual Monitor Stand, Adjustable Spring Monitor Desk Mount Swivel Vesa Bracket with C Clamp/Grommet Mounting Base for 17 to 27 Inch Computer…
Original price was: $67.99.$59.99Current price is: $59.99.
iuqiddis –
This dual arm monitor mount is amazing.
Very easy to install and set up.
USB ports are not included but you can remove the inserts and use them as passthrough for wired keyboards and mouse.
Venkat –
Very nice dual monitor stand. Installation was easy with the exception of cable management. There’s covers over the arms that are meant to conceal the monitor cables. The “upper” covers are easy to remove but it’s not obvious how to remove the “lower” covers. Either way, I squeezed the monitor cables in the lower arms and it looks real clean. I hate clutter! I was concerned about using the C clamp on my desk. It’s a nice desk but I’m sure it’s veneer over particle board. I did add 8” x 3” x 1/8” steel on top and below the C clamp to help better distribute the weight but it probably wasn’t necessary. The stand is very sturdy and the monitor can be adjusted easily. I’m pleased that the desk easily supports the weight, also pleased with the 20% coupon!
iuqiddis –
Its a well built articulating dual monitor mount. I’d recommend it if you need the extra features (you often find yourself moving the monitor position a lot). The downside is that to enable the articulation, you need to leave some space behind your desk. In my current setup, I have about 6″ of space between the wall and the desk to fit the monitors at the right angle for me (see picture) . For most people, I’d recommend a simpler dual mount which doesn’t have a piston for articulation. They take less space, and are cheaper.
SGullen –
I have had this dual mount for about two weeks now. I have two 27in curved monitors, one an msi and the other a Samsung. First this is a very well put together piece of equipment. So many different little parts like the one that attaches it to the desk. Has about 3 different ports or the width of the desk and will fit most depths as I can tell. Also has a port to install USB ports to the mount. Doesn’t come with mount but a very small cost to add that upgrade. Also the cable management for the arms is also very good. Very sturdy, clean design. If I could give it 10 stars I would.
SGullen –
Nice
jose garcia –
This is a perfect fit for the glass top desks. Was looking for dual monitor mount for a the costco height adjustable desk(Tresanti) and this fits well as the base that touches the glass is wider And distributes the pressure evenly across the glass. To make sure the pressure is distributed even more, i have added vivo steel plate to be on safer side which 8”x6”. The desk bars aren’t wider enough to support the 2 circular adjustable screws to tighten. So i have used the 1 steel plate that came with vivo steel plate bottom portion and other one that is used for grommet mounting so that the whole circle screw will provide the pressure on the bar. Mounting the monitors was easy. It would have been nice the screws that are provided are black so that they match with the monitor color. The best part is hiding cables along with the arms. Make sure to have the cables are installed before installing the stand to the table. I had a tough time to unscrew the cable cover from bottom arm after mounting to the table that inturn caused to damage one of the cable cover. The possible downside of this mount is it only supports monitors that is weighing less than 14 pounds. Some of the reviews for this product is less rated, but those reviews are for a different product. So do not worry about those less rated reviews.
jose garcia –
If you have multiple monitors on your desks and are using he regular monitor stand you are doing it wrong. If you want a clean desk and space to work on then get some monitor arms. I have used several different mounts over the years and these are easily the best I have used. The hydraulic arms are $$$ and are simple to adjust. And you have 2 different ways to mount them to your desk. Have a nice desk and dont want to drill a hole? The clamp is really robust and is what I am using. Great mount and great price. You cant go wrong here.
Joseph A. Malucci –
Worth the money. Love it
DT –
I’m am really satisfied with the performance of the stand and the arms. Set up wasn’t too bad at all. it wasn’t difficult to unsnap the top cover and take out the screw from the housings to run the lines through. Assembling the clamp was also fairly easy and quick. I was careful to not overtighten the mounting screws on the back of the monitors. I threaded the screws down by hand until they came to a stop (when they touched the bracket and no threads were showing) and only then use the screwdriver to give them another turn.
I have two 27 inch Samsung monitors hanging from these things. The instructions for the gas shocks are simple – there is a spruce lights that you turn either counterclockwise or clockwise to increase or decrease the force on the shocks. I had to do that on both of them. Once I got them set in their position I haven’t seen any drooping or raising of the monitors.
These things really couldn’t be any better.
Venkat –
Overall quality is nice—it looks good and is easy to install and use (I have it clamped to the back of my desk, which is less than 1″ thick). However, the stand does not adjust high enough for my eye height. I can change my desk height (I have a desk that adjusts for standing or sitting), and when the desk is at the proper height for writing, mousing, etc., the monitors are too low and I tend to hunch. If I raise the desk height so I can look straight ahead at my monitors, then I tend to get shoulder pain because the desk is too high for my mouse and tablet, which I use quite a lot — probably more than the keyboard. I do have a keyboard tray under the desk and have experimented with various arrangements of my input devices, but can’t get to an ideal arrangement for the way I work. The clamp that holds the stand on the desk can accommodate a thicker desk — I’m thinking I can raise my monitors a couple of inches by putting a block of wood or two under the base of the mount to raise it up a couple of inches (won’t that look nice?).
I’m not sure if this would be a problem if I had taller monitors (they measure 24″ wide x 11″ tall).